Flaps Both Sides Mail Slots. Oil Rubbed Bronze finish is a chemically darkened surface designed to simulate aged bronze with a matte lacquer applied. This finish is very dark and varies from a deep chocolate brown to a dark gray and usually has reddish undertones. Fowler flaps extend in stages. Depending on the type of aircraft, the flaps run on racks or rails in a series controlled by the pilot. Fowler flaps sometimes also have slots, and are known as slotted Fowler flaps. All are far more complex than plain flaps. You may also hear the phrase “flaperon.”.

1. The Mail Slot features an 11 in. Wide opening and spring-loaded front plate with an interlocking flap for tight closure. It can be easily installed as a replacement for an existing slot or new when combined with the Mail Slot Sleeve. This durable Mail Slot will provide outstanding service in all types of weather. Mounting hardware is also provided.
2. How does the double-slotted flap system compare to flying with slats, slots, cuffs, or VGs? Most leading edge devices work by delaying the stall to a higher angle of attack. You can fly slower but only by increasing the angle of attack, which reduces over-the-nose visibility during landing (and makes little difference during takeoff).

Hole size required 2-3/4' x 11-5/8'

Hole size required 2-3/8' x 8-3/8'

• Polished Brass

  Polished Brass finish is solid brass that is polished and gloss lacquer coated to prevent tarnishing over time. Common finish codes for polished brass are 605 and US3. Also available un-lacquered that can be waxed or allowed to age naturally.

• Polished Chrome

  Trivalent Chrome is a new “green” chrome finish that eliminates the health and environmental concerns associated with hexavalent chrome. Trivalent chrome has the same tough, highly reflective, slightly blue cast of traditional hexavalent chrome. Chrome lead time is approximately 4-6 weeks. Common finish codes for chrome are 625 and US26.

  BRASS Accents does custom matching to your finish sample on a quote basis only. We also do finish work on your brass hardware, again on a quote only basis.

• Gloss Black

  Powder Coat Finishes.BRASS Accents provides a wide assortment of powder coat finishes which are satin textured finishes designed to simulate iron hardware. Finish code GB.

• Polished Nickel

  Polished Nickel finish is nickel plated brass, polished to a high shine and clear gloss lacquer coated. This is a warm bright finish without the harsh look of chrome. Finish code 618 and US14.

• Gloss Red

  Powder Coat Finishes.BRASS Accents provides a wide assortment of powder coat finishes which are satin textured finishes designed to simulate iron hardware. Finish code RD.

• Antique Nickel (Pewter)

  Antique Nickel (Pewter) finish is nickel plating on brass that has been dulled and darkened to simulate pewter with a matte lacquer applied. This may be referred to as pewter or antique nickel interchangeably. Common finish codes for antique pewter are US15A and 620.

• Gloss White

  Powder Coat Finishes.BRASS Accents provides a wide assortment of powder coat finishes which are satin textured finishes designed to simulate iron hardware. Finish code WT.

• Antique Copper

  Antique Copper finish is copper plated brass chemically darkened to simulate aged copper with a matte lacquer applied. Antique Copper finish is typically a medium black with copper undertones, and can vary significantly from one product to another. To ensure that the finish is right for you, samples should be ordered in advance. Common finish code for antique copper is 657.

• Oil Rubbed Bronze

  Oil Rubbed Bronze finish is a chemically darkened surface designed to simulate aged bronze with a matte lacquer applied. This finish is very dark and varies from a deep chocolate brown to a dark gray and usually has reddish undertones. There are quite a variety of interpretations of this finish in the hardware industry and all oil rubbed bronze finishes do not match. To ensure that the finish is right for you, samples should be ordered in advance. Common finish codes for oil rubbed bronze are US10B and 613.

• Satin Nickel

  Satin Nickel finish is nickel plating on brass that has been satin finished with an abrasive and matte lacquer coated. Common finish codes for satin nickel are US15 and 619.

• Aged Brass

  Aged Brass much more realistically replicates the look of actual antique brass hardware. This finish is hand done in the USA by our skilled metal finishers with a gloss lacquer applied and offers the imperfections and soft patina look of actual antique hardware. Finish code 486.

• Antique Brass

  Antique Brass finish is solid brass which has been chemically darkened and highlighted with an abrasive to simulate aged brass. Antique Brass finish is typically a medium brown with golden undertones with a matte lacquer applied, and can vary significantly from one product to another. To ensure that the finish is right for you, samples should be ordered in advance. Common finish codes for antique brass are US5 and 609.

• Highlighted Brass

  Highlighted Brass is a special finish with gloss lacquer applied, designed to show off the exquisite detail of our hardware while allowing customer to maintain a polished brass finish. Finish code 610.

• Satin Brass

  Satin Brass finish is a brass that has been dulled and matte lacquer coated. Common finish codes for satin brass are US4 and 606.

• Weathered Black

  Powder Coat Finishes.BRASS Accents provides a wide assortment of powder coat finishes which are satin textured finishes designed to simulate iron hardware. Finish code Weathered Black 622.

• Weathered Rust

  Powder Coat Finishes.BRASS Accents provides a wide assortment of powder coat finishes which are satin textured finishes designed to simulate iron hardware. Finish code Rust 770.

Distinctive craftsmanship.
Old-world tradition.

The finest example of classic styling, timeless beauty and enduring quality, the hallmarks of BRASS ACCENTS, one of the worlds leading crafters of cast-brass and hot-forged decorative brass hardware. Call for a price list and catalog today.

Hole size required 2-3/4' x 11-5/8'

Slots Flipping And Dipping 2019

Hole size required 2-3/8' x 8-3/8'

Slats Flaps Jammed A320

• Polished Brass

  Polished Brass finish is solid brass that is polished and gloss lacquer coated to prevent tarnishing over time. Common finish codes for polished brass are 605 and US3. Also available un-lacquered that can be waxed or allowed to age naturally.

• Polished Chrome

  Trivalent Chrome is a new “green” chrome finish that eliminates the health and environmental concerns associated with hexavalent chrome. Trivalent chrome has the same tough, highly reflective, slightly blue cast of traditional hexavalent chrome. Chrome lead time is approximately 4-6 weeks. Common finish codes for chrome are 625 and US26.

  BRASS Accents does custom matching to your finish sample on a quote basis only. We also do finish work on your brass hardware, again on a quote only basis.

• Gloss Black

  Powder Coat Finishes.BRASS Accents provides a wide assortment of powder coat finishes which are satin textured finishes designed to simulate iron hardware. Finish code GB.

• Polished Nickel

  Polished Nickel finish is nickel plated brass, polished to a high shine and clear gloss lacquer coated. This is a warm bright finish without the harsh look of chrome. Finish code 618 and US14.

• Gloss Red

  Powder Coat Finishes.BRASS Accents provides a wide assortment of powder coat finishes which are satin textured finishes designed to simulate iron hardware. Finish code RD.

• Antique Nickel (Pewter)

  Antique Nickel (Pewter) finish is nickel plating on brass that has been dulled and darkened to simulate pewter with a matte lacquer applied. This may be referred to as pewter or antique nickel interchangeably. Common finish codes for antique pewter are US15A and 620.

• Gloss White

  Powder Coat Finishes.BRASS Accents provides a wide assortment of powder coat finishes which are satin textured finishes designed to simulate iron hardware. Finish code WT.

• Antique Copper

  Antique Copper finish is copper plated brass chemically darkened to simulate aged copper with a matte lacquer applied. Antique Copper finish is typically a medium black with copper undertones, and can vary significantly from one product to another. To ensure that the finish is right for you, samples should be ordered in advance. Common finish code for antique copper is 657.

• Oil Rubbed Bronze

  Oil Rubbed Bronze finish is a chemically darkened surface designed to simulate aged bronze with a matte lacquer applied. This finish is very dark and varies from a deep chocolate brown to a dark gray and usually has reddish undertones. There are quite a variety of interpretations of this finish in the hardware industry and all oil rubbed bronze finishes do not match. To ensure that the finish is right for you, samples should be ordered in advance. Common finish codes for oil rubbed bronze are US10B and 613.

• Satin Nickel

  Satin Nickel finish is nickel plating on brass that has been satin finished with an abrasive and matte lacquer coated. Common finish codes for satin nickel are US15 and 619.

• Aged Brass

  Aged Brass much more realistically replicates the look of actual antique brass hardware. This finish is hand done in the USA by our skilled metal finishers with a gloss lacquer applied and offers the imperfections and soft patina look of actual antique hardware. Finish code 486.

• Antique Brass

  Antique Brass finish is solid brass which has been chemically darkened and highlighted with an abrasive to simulate aged brass. Antique Brass finish is typically a medium brown with golden undertones with a matte lacquer applied, and can vary significantly from one product to another. To ensure that the finish is right for you, samples should be ordered in advance. Common finish codes for antique brass are US5 and 609.

• Highlighted Brass

  Highlighted Brass is a special finish with gloss lacquer applied, designed to show off the exquisite detail of our hardware while allowing customer to maintain a polished brass finish. Finish code 610.

• Satin Brass

  Satin Brass finish is a brass that has been dulled and matte lacquer coated. Common finish codes for satin brass are US4 and 606.

• Weathered Black

  Powder Coat Finishes.BRASS Accents provides a wide assortment of powder coat finishes which are satin textured finishes designed to simulate iron hardware. Finish code Weathered Black 622.

• Weathered Rust

  Powder Coat Finishes.BRASS Accents provides a wide assortment of powder coat finishes which are satin textured finishes designed to simulate iron hardware. Finish code Rust 770.

Slats Flaps Spoilers

Distinctive craftsmanship.
Old-world tradition.

The finest example of classic styling, timeless beauty and enduring quality, the hallmarks of BRASS ACCENTS, one of the worlds leading crafters of cast-brass and hot-forged decorative brass hardware. Call for a price list and catalog today.